Zinc Diecasting Tooling Design Information for Frech DAW20
Tooling and Platen details for the Frech DAW20 hot chamber zinc diecasting machine.
Please Note : The information displayed in this section is for the benefit of toolmakers supplying diecasting tools to fit our Frech DAW20 diecasting machine. The Frech group is not responsible for the accuracy of information displayed and it should not be used for any purpose other than designing tools for PMS Diecasting Limited.
Technical Data
Technical Data for the Frech DAW20 Zinc Diecasting Machine
| Locking Force | kN | 240 |
| Closing Stroke | mm | 180 |
| Ejector Force | kN | 30 |
| Sapce Between Tie Bars | mm | 250 x 250 |
| Ejector Stroke | mm | 50 |
| Die Height | mm | 120 - 300 |
| Casting Force Max | kN | 40 |
| Injection Plunger Diameter | mm | 36, 40, 45 |
| Casting Volume | cm3 | 39, 56, 79 |
| Specific Injection Pressure | daN/cm2 | 392, 317, 250 |
| Casting Area | cm2 | 61, 76, 96 |
| Traverse Stroke | mm | 105 |
| Dry Cycle Speed per | /hour | 2000 |
| Hour DIN 24480 | ||
| Weight of Machine | Kg | 3000 |
